Most people in Sandy think of mold as a humid-climate problem. Utah is dry, so it can't happen here, right?  Our team gets calls that prove otherwise.

When it gets cold, we close the windows, run the furnace, turn on humidifiers, and take long hot showers. Moisture that would normally escape stays inside. It collects on cold windows, exterior walls, and in basements. Give it a few weeks and mold has everything it needs.

Here's what to watch for this winter, where to look, and when it's time to call a professional.

Why winter brings mold indoors

Mold needs three things: moisture, a food source like drywall or wood, and time. Winter in the Wasatch Front supplies all three.

•         Condensation. Warm indoor air hits cold glass and cold walls and turns into water. Look for wet window sills and dark spots in the corners of rooms on outside walls.

•         Humidifiers. They help with dry skin and static, but one that runs all day can push moisture into walls and carpet.

•         Bathrooms and laundry rooms. Steam has nowhere to go when fans are skipped or vented into the attic.

•         Basements. Many Sandy, Draper, and Cottonwood Heights homes have finished basements. Snowmelt, a small foundation leak, or a slow plumbing drip can stay hidden behind drywall for months.

•         Ice dams and roof leaks. Melting snow can work its way into attic insulation and ceilings.

Warning signs to look for

You don't always see mold first. Often you smell it.

•         A musty or earthy smell, especially in the basement or a closet

•         Black, green, or gray spotting on walls, ceilings, grout, or window frames

•         Peeling paint, bubbling drywall, or warped baseboards

•         Water stains that keep growing

•         Condensation that sits on windows most mornings

•         Family members noticing the air feels stuffy or stale in one part of the house

Where to check this week

Take 15 minutes and walk the house:

1.       Window sills and the bottom corners of windows

2.       Behind furniture pushed against exterior walls

3.       Under bathroom and kitchen sinks

4.       Around the water heater, furnace, and washing machine

5.       Basement corners, storage rooms, and the back of closets

6.       The attic, if you can reach it safely, especially near bathroom fan vents

What you can handle and what you shouldn't

A small spot on shower grout or a window sill that wipes off and doesn't come back is usually a cleaning and ventilation issue. Run the bath fan, wipe down condensation, and keep indoor humidity in check.

Call a professional when:

•         The mold covers more than a small patch

•         It keeps coming back after cleaning

•         You smell mold but can't find it

•         It follows a leak, flood, or water damage

•         It's in drywall, insulation, carpet, or HVAC ducts

•         Someone in the home has asthma, allergies, or a weakened immune system

Scrubbing or spraying bleach on porous materials like drywall rarely fixes the problem. It can also send spores into the air and spread them to other rooms. If moisture is still there, the mold comes back.

How Lightspeed handles mold remediation

Our goal is to fix the cause, not just the stain.

1.       Find the moisture. We use moisture meters and thermal imaging to find where water is coming from and how far it has spread.

2.       Contain the area. We set up containment and air scrubbers so spores don't travel to clean parts of your home.

3.       Remove what can't be saved. Affected drywall, insulation, or carpet is removed and disposed of properly.

4.       Clean and treat. Remaining surfaces are cleaned and treated.

5.       Dry it out. We dry the structure so mold has no reason to return.

6.       Help you prevent the next one. We walk you through what caused it and how to keep it from happening again.

We also work with your insurance company when the mold is tied to a covered water loss, and we'll explain what we find in plain language.

Serving Sandy and the surrounding area

Lightspeed Restoration of Sandy is a family-owned business serving Sandy, Draper, Midvale, Murray, Cottonwood Heights, Holladay, and nearby Utah communities. We treat every home the way we'd want ours treated, with empathy, respect, and ownership.

Written by Tami Nelson, Owner, Lightspeed Restoration of Sandy. Reviewed by Dallas Nelson, Lead Technician.  Last reviewed November 2026.

If you smell something musty or see spots that keep coming back, don't wait for spring. Call Lightspeed Restoration of Sandy at 801.573.5168 or visit lightspeedrestoration.com/sandy-ut to schedule a mold inspection.

Schedule an Appointment

To request a service call you only need to fill out the form below. We will contact you via phone, email, or text to confirm the best appointment time. You will receive an email confirming your service request.

Emergency Service Needed

Phone to call or Call Now (801) 336-4919
Categories